ReleaseWire Connect

An electrical fuse can be defined as a device which is used to interrupt the flow of current by interrupting the electrical circuit during the condition of over current caused by short circuit and/or overload. During over current, the fuse element melts and saves the circuit as it disconnects the supply from the load. Electrical fuses are classified under different voltage segments such as low voltage fuses and high voltage fuses. On the basis of voltage level of installations, the electrical fuses market in North America has been segmented into two categories; low voltage fuses and high voltage fuses wherein plug-in fuses and cartridge fuses are the segments the low voltage fuses has been further categorized into. The electrical fuses market on the basis of application has been segmented into automotive, construction, consumer electronics, industrial, power generation and others. By country, the market has been segmented into the U.S., Canada and Mexico. The above segments have been covered in terms of both revenue (USD million) and volume (units million).

Commercial refrigerators are developed to meet the demands of commercial applications. Unlike to domestic applications, commercial refrigerators are high-performing and rugged in design. These refrigerators and freezers are designed such as that they can store large quantity of goods for long period of time as compared to domestic refrigerators. These refrigerators and freezers are available in wide range of storage temperature and capacity, to meet multiple end-use need.

Autoclaves play a vital role in sterilization of health care waste in hospitals, health care organizations, and academics. Medical devices require autoclaving after usage, as these get contaminated. Health care professionals have set the process of autoclaving on high priority due to increasing awareness about safety of patients. Rising number of surgical procedures and nosocomial infections (hospital-acquired infection) is driving demand for autoclaves. Growing geriatric population and rise in prevalence of cancer are the other factors that drive the steam autoclave market. This report studies the current scenario as well as future market potential for steam autoclaves globally. It comprises an elaborate executive summary, which includes a market snapshot that provides market dynamics of various segments and sub-segments that are included in the report.

Demand for traction equipment is increasing globally. The major factor driving this growth is increasing demand for efficient railway transportation. Due to the rapid increase in freight and passenger traffic, countries around the world are trying to develop and modernize their railway networks. Rising populations and growing economies have created demand for mass transportation. Many countries, such as China and Spain, are rapidly developing their high-speed rail networks. While countries such as India and the U.S. focus on increasing the electrified lines in their network, others, such as Brazil, Germany, and the U.K., are focusing on modernizing their aging fleets. Traction systems are used to pull or draw vehicles (i.e., they act as propulsion systems for trains). Hence with the increasing presence of locomotive and electrified rail lines, the traction equipment market will also expand during the forecast period. Asia Pacific occupied the largest share of the traction equipment market in 2015, closely followed by Europe.

The healthcare API market report provides an in-depth analysis of the global healthcare API market for the period 2014 – 2024, wherein 2015 is the base year and the years from 2016 to 2024 is the forecast period. Data for 2014 has been included as historical information. The report covers all the prevalent trends playing a major role in the growth of the healthcare API market over the forecast period. It also highlights various drivers, restraints, and opportunities expected to influence the market's growth during the forecast period. The study provides a holistic perspective on market growth in terms of revenue estimates (in US$ Mn), across different geographies, which include North America, Europe, Asia Pacific (APAC), Middle East & Africa (MEA), and Latin America (LATAM). The report provides cross-sectional analysis of the global healthcare API market in terms of market estimates and projections for all the segments across different geographic regions. The report also covers profiling of major players, their growth strategies, their market positioning, and their various recent developments, and includes market positioning analysis of key players operating in the healthcare API market.

Globally, electronic device components are being pushed towards micro spatially demanding structures. With the gradual movement towards the limit of Moore's Law, several research and development (R&D) programs are ongoing in pushing the limit of Moore's law. Thin film deposition techniques aid the semiconductor industry in performing the same. It is a process of creating a thin layer on top of a substrate or on top of another 'thin film'. The thickness of the films can range between nanometers to micrometers. Thin film deposition is currently in very high demand and enormous amount of R&D is also ongoing to develop the process further. It is currently being used for various different applications, such as printed electronics, energy generation, optical coatings and energy storage among others. Thin film deposition process can be broadly divided in to Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD). Atomic Layer Deposition (ALD) is considered to be a type of CVD. Both CVD and PVD have various different techniques, advantages and disadvantages. Additionally, continuing technological advancements, has led to the possibility of deposition of different materials on required substrates.

This report provides strategic analysis of the global hazardous area sensors market, and the growth forecast for the period 2015 to 2023. The scope of the report includes competitive analysis of various market segments based on the types, application industry, and in-depth cross-sectional scrutiny of the hazardous area sensors market across different geographical segments. Hazardous Area Sensors refer to sensors which have been developed for usage in potentially explosive environments. The growing importance for 'Intrinsic Safety' across various industry verticals is primarily driving growth of the hazardous area sensors market. Additionally, increasing stringency of government legislations and policies across the globe, governing hazardous area certified products, have been compelling users of hazardous area equipment to adhere to strict classification standards and certifications. This in turn is also steadily boosting growth of the global hazardous area sensors market. Furthermore, the renewed interest in shale gas and 'coal gas' has led to growing explorations for gas beds which in turn has aided in increased application of hazardous area sensors. Considering the positive impacts of the factors mentioned previously, the hazardous area sensors market can be anticipated to grow steadily during the forecast period.

The report analyzes the current and future prospects of the physician dispensed cosmeceuticals market across the globe for the forecast period from 2016 to 2024. The research is a combination of primary and secondary research. Primary research formed the bulk of our research efforts, with information collected from telephonic interviews and interactions via e-mails. Secondary research involved study of company websites, annual reports, press releases, stock analysis presentations, and various international and national databases. The report provides market size in terms of US$ Mn and compound annual growth rate (CAGR %) for each product segment during the forecast period from 2016 to 2024, considering 2014 and 2015 as base years.

Superhydrophobic coatings are nanocoatings that are manufactured by using nanoparticles of metals and metal oxides, carbon nanotubes, and graphene as key raw materials. These coatings exhibit outstanding water repellent property and provide protection from microbial growth, corrosion, dust, oil spills, water, and other liquids. Electronics & telecommunication, automotive, textile & leather, building & construction, and medical & health care are the major end-user segments of the global superhydrophobic coatings market. In terms of volume, electronics & telecommunication segment held the largest share of the superhydrophobic coatings market in 2015. However, textile & leather is anticipated to offer considerable growth prospects during the forecast period. The outlook for the superhydrophobic coatings market appears positive in major countries such as the U.S., Germany, and China during the forecast period, owing to the intensifying consumption of these coatings in electronics & telecommunication, building & construction, and automotive industries.

This research study analyzes the hearing aids market in terms of revenue (US$ Mn). The hearing aids market report comprises an elaborate executive summary, which includes a market snapshot that provides information about various segments of the market. The report also includes key market dynamics, such as drivers, restraints, and opportunities, affecting the demand for hearing aids products globally. Comparative analysis has also been included in the executive summary that resembles the percentage market share of each regions in 2015 and 2024, respectively.