Solar Light Company, Inc.

Solarmeter 6.5 UV Index Meter Named #1 UV Tester by Ezvid Wiki

LogoSolarmeter Model 8.0 UVC Meter Takes #7 Spot

Optronic Laboratories, LLC, Dba Gooch & Housego (Orlando), Asset Purchase Completed

LogoSolar Light Company, Inc. announces that the assets of Gooch and Housego (Orlando) have been acquired. The new entity will operate as Optronic Laboratories, Inc., from its facility in Orlando, Florida, USA. Optronic Laboratories, Inc. will become an affiliate of Solar Light Company, Inc.

Solar Light Gains ISO9001:2015 Accreditation

LogoSolar Light Company Inc. is happy to announce our company's accreditation to ISO9001:2015 via DEKRA Certification, Inc. The whole process was completed in under 11 months, which is a testament to the robust QMS already in place at the company. You can view a copy of the ISO Certificate here.

Solar Light Company, Inc. Announces Custom-Spectra Output Solar Simulators for SPF and Medical Research

LogoToday, Solar Light Company, Inc. announced the introduction of Retrofitable Custom Spectra Kits for its existing line of Solar Simulators in the 601-Series, LS1000-Series, and 16S-Series. As SPF and medical research continues to rapidly evolve into different wavelengths, Solar Light can quickly and affordably adapt existing simulators in the field to output custom spectra, making them indispensable tools for professional laboratory applications. Some of the company's most popular retrofit kits include:

Solar Light Company, Inc., Expands Global Commercial Operations, Adds Jeffrey W. Hall as Executive Vice President – Commercial Operations

LogoSolar Light Company, Inc., the global provider of specialized light-measuring sensors and systems for global health protection and environmental monitoring applications announces the hiring of Jeffrey Hall as Executive Vice President – Commercial Operations.

Solar Light Company, Inc. Introduces New 1000W High Energy Visible Solar Simulators

LogoSolar Light's new specialty line of HEV Solar Simulators are designed specifically for professional research in the High Energy Visible spectra. These state of the art single output HEV Solar Simulators produce solar radiation in the 400-500nm range, or that portion of the visible light spectrum that is closest to the UV band - mainly violet and blue light rays. In addition to the HEV output, they can be quickly and easily configured by the end user to provide UVA only, UVB only, UVA+B, or full spectrum sunlight optionally. Custom spectra are also available. These units are specifically designed for in vitro and in vivo clinical, medical, and photobiological studies including SPF, oxidative stress, hyperpigmentation, age spots, and melasma. Our LS1000 Models are available with 1000W output, in round or square beam sizes ranging from 5cm to 15.25cm, in compliance with laboratory standards such as ASTM, IEC, and ISO. They come complete with everything required to begin testing immediately, including Solar Simulators, Power Supplies, Automatic Dose Controllers, NIST-Traceable PMA-Series Sensors, safety glasses, and other related accessories.

New Solarmeter Model 8.0RP Digital UVC Radiometer with Remote Probe

LogoSolar Light's new Solarmeter Model 8.0RP UVC Meter combines the same NIST-traceable accuracy and reliability you're used to from the standard Model 8.0 UVC meter with a remote probe on a 3 foot (0.91 meter) cable. The probe is black anodized aluminum for maximum durability and light weight, and measures a compact 0.8" high x 1.6" diameter (20.3mm high x 40.6mm diameter.) Compared to the standard model's fixed position sensor, the remote probe provides an added measure of flexibility in positioning during measurements. This can be of critical importance in typical applications with limited space such as monitoring UVC germicidal lamp intensity and aging, measuring germicidal lamp fixture leakage, and testing eyewear UVC blocking capabilities.

Solar Light Company, Inc. Introduces 16S-150-001 Solar Simulator for in-Vivo SPF Testing

LogoSolar Light's precision research-grade 16S-150-001 SPF Testing Solar Simulator is specifically designed for In Vivo SPF sunscreen testing in compliance to the latest ISO24442, ISO24444, FDA Final Rule, JCIA, Australian, and COLIPA spectral irradiance standards. This state of the art single output 150W unit produces solar UV radiation in the 290-400nm range, and can be quickly and easily configured by the user to provide UVA only, UVB only, UVA+B, or full spectrum sunlight optionally. The unit's 0.4" / 1 cm horizontal beam output is approximately 20 times the intensity of the sun, delivering 2.9 MED/min UVA+B or 85 mW/cm² UVA-Only. A patient stop is included as shown to ensure accurate irradiation onto the test subjects. Our DCS-2 Automatic Dose Control System is also included to continuously monitor the output, and automatically deliver the exact required dose. Everything required for instant testing right out of the crate is included direct from the factory: Solar Simulator, Automatic Dose Controller, NIST-traceable SUV and UVA Sensors, and all related accessories.

Solar Light Company, Inc. Introduces New Solar Simulator Packages for Photovoltaic Cell Testing

LogoSolar Light's state of the art single output PV Cell Testing Solar Simulators produce Class A Air Mass 1.5 Emission Spectrum to accurately replicate full spectrum sunlight, with 1 sun output intensity. They can also be quickly and easily configured by the user to provide UVA only, UVB only, UVA+B, or custom spectra optionally. Models are available from 150W / 1.2 (3 cm) to 1000W / 6 (15.25 cm) These precision research-grade instruments are specifically designed for testing photovoltaic cells in accordance with the latest ASTM, IEC, and ISO laboratory standards, and come complete with everything required to immediately begin testing, including the Simulator, intelligent Power Supply, advanced Data Logging Radiometer, PMA-Series Full Spectrum Class II Pyranometer, safety glasses, and more. A Source Meter and Calibrated Reference Cell are also available optionally.

Solar Light Company, Inc. Announces a New, Ultra-Accurate Accelerated Indoor UV / Florescent Light Testing Service

LogoSolar Light Company, Inc. announces a new, ultra-accurate Accelerated Indoor UV / Florescent Light Testing Service for indoor exposure of plastics (including vinyls, PE, ABS, acrylics, polycarbonates, PET, HIPS, and other synthetic materials,) paints, coatings, textiles, inks, dyes, papers (including cardboards and wallpapers,) and any other materials which are subject to degradation inside. The company's state of the art laboratory uses fluorescent sources of several types, depending on the customer's unique requirements. In most cases, exposure to a year's worth of indoor can be accomplished in under a week, objectively determining the sample material's reaction per standards such as ASTM G154. As the test proceeds, trained physicists are able to collect data points such as colorimetry, gloss measurements, photography, and more, ultimately producing a formal report detailing all results of the test.